Hold Down Options

Shade Sheds & Canvacon

Concrete Pier Kit

Concrete Pier Kit - for a more permanent installation. Footings are concreted into the 450mm round and 600mm deep hole. For details on installation see our installation guide

Hold Down Pegs

Hold Down Pegs These ground anchors are great for semi-permanent installation in good cohesive soil. Used for shade sheds and canvacon products and can maintain wind ratings below.

  • Temporary W41/N3 - 6 hold down pegs (Standard wind rating for most areas around Australia)
  • Permanent W41/N3 – 8 hold down pegs (Standard wind rating for most areas around Australia)
  • Temporary W50/C2 – 8 hold down pegs (Cyclonic wind rating for sheds predominately along coastline from Rockhampton to Cairns)
  • Permanent W50/C2 – 12 hold down pegs (Cyclonic wind rating for sheds predominately along coastline from Rockhampton to Cairns)

Saddle Plate

Saddle plates are dyna bolted to a concrete slab. Used for more permanent structures. Four saddle plates are used for 6m x 6m shade shed or canvacon shed.

Quick Shades

Ground Anchor

Ground Anchors - great for semi-permanent installation in good cohesive soil. Comes in a set of four maintains a W50/C2 cyclone rating

Quick Shade - Concrete Pier Kit

Concrete Pier Kit - for a more permanent installation. Footings are concreted into the 450mm round and 600mm deep hole. For details on installation see our installation guide. Comes in a set of four maintains a W50/C2 cyclone rating.

Rock Feature

Rock Feature - Designed specifically for the Quick shade this rock feature is visually appealing and provides an easy to move hold down option. Perfect for temporary structures and maintains a w50/c2 cyclone rating.

Swage Bolt

Swage Bolt - plates are bolted to a concrete slab. Used for more permanent structures. Four swage bolts are used a quick shade which will maintain a W50/C2 cyclone rating

IMPORTANT TO READ – BUY THE ORIGINAL
The Original and only Registered Business Brand Name Transportable Shade Sheds is owned by Allan Lear . He designed Australia’s first and only branded name the Transportable Shade Shed in 2000 and started Transportable Shade Sheds in 2001 . Allan obtained two innovation patents for the bend and swaging technology which has won the company numerous Australian awards which can be seen on our website . Customers beware that other products on the market have unsuccessfully tried to copy our bends in order to appear similar. These knock off products have been made using angle cuts and welds with potential join rust developing and weakened construction because they don’t have the technology to form a seamless bend with increased strength due to the angle. THE ORIGINAL NO RUST BEND SHADE SHED.